Description
Our Custom 1” wide belts ordinarily measure approximately 15/16 of an inch in width and are designed to fit the standard 1” buckle. The easiest way to measure the nominal width of the belt is with a set of outside calipers calibrated in inches. If you do not have calipers, lay the belt on the side that ordinarily faces out and measure across the flat lining that is worn closest to your body, this measurement should equal the width. Measuring the section between the tip and nearest hole ordinarily has the least amount of stretch. Determine the length and other specifications, as instructed in the frequently asked questions section on the home page of our site. The 1” belt will be equipped with an in stock style buckle of your choice in either a brass or nickel finish. If you have any questions, or you need a belt that is not listed, call Brian or Pete @ 863-858-6971 before ordering .
Reviews
There are no reviews yet.